Here is a collection of articles that guide you to initially set up difference Reolink models via Reolink software. 

Applies to: All Reolink devices.

Note: Before the initial setup, please download Reolink Client in the Download Center or scan the QR code to download and install the latest version of the Reolink App.

reolink-app-qr-code__3_.jpg

This article will be generally divided into three different parts:

1. Initial setup of Reolink cameras

2. Initial setup of Reolink NVRs

3. Initial setup of other Reolink devices

1. How to Initialize Reolink Cameras

1.1 Via Reolink App

For battery-powered cameras including battery-powered WiFi cameras (Argus series, battery-powered Duo and TrackMix) and battery-powered 4G cameras such as Go series, Duo 4G, Duo 2 LTE and KEEN Ranger PT, refer to the instructions below:

For WiFi cameras powered by a DC power adapter:

For PoE cameras such as RLC series PoE cameras, Duo PoE, TrackMix PoE, and Video Doorbell PoE, check the instruction below:

1.2 Via Reolink Client

For battery-powered cameras including battery-powered WiFi cameras (Argus series, battery-powered Duo and TrackMix) and battery-powered 4G cameras such as Go series cameras, Duo 4G, Duo 2 LTE and KEEN Ranger PT, please refer to the links below:

For WiFi cameras powered by a DC power adapter:

For PoE cameras such as RLC series PoE cameras, Duo PoE, TrackMix PoE, and Video Doorbell PoE, refer to: How to Initially Set up Reolink PoE Cameras via Reolink Client (New Client)

2. How to Initialize Reolink NVRs

2.1 Via Reolink App

Refer to: How to Initially Set up Reolink NVRs via Reolink App

2.2 Via Reolink Client

Refer to: How to Initially Set up Reolink NVRs via Reolink Client (New Client)

2.3 With a monitor connected

For Reolink NVRs such as RLN8-410, RLN16-410 and RLN36, please refer to:

3. How to Initialize Other Reolink Devices (Floodlight)

This part mainly gathers the articles on the initial setup for other Reolink devices via Reolink App.

For Reolink Floodlight WiFi and Reolink Floodlight PoE, check the instructions below: