How to Initially Set up Reolink Battery-powered WiFi Cameras via Reolink Client (New Client)

This article will show you how to initially set up battery-powered WiFi Cameras via Reolink Client step by step.

Applies to: Argus 2, Argus 2E, Argus 2E Plus, Argus Pro, Argus PT, Argus PT Pro, Argus PT Plus, Argus PT Ultra, Argus Series B440, Argus PT Lite, Argus Series B420, Argus Eco, Argus Series B320, Argus Eco Pro, Argus Series B340, Argus Eco Ultra, Argus Series B360, Argus 3, Argus 3 Pro, Argus Series B330, Argus 3 Plus, Argus 3 Ultra, Argus Series B350, Argus 3E, Argus Series B310, Argus Track, Argus Series B730, Reolink Duo (battery), Reolink Duo 2 (Battery), Duo Series B750, Reolink TrackMix (battery), Reolink Video Doorbell (Battery), D340B, Argus MagiCam, Reolink Solar Floodlight Cam.

Note: Before the initial setup, download the latest Reolink Client in the Download Center.

Here is a video for your reference:

Step 1. Power on the camera. Remember to turn on the power switch on the camera before initial setup, except for Argus 2 and Argus Pro.

Step 2. Click the “+” icon, choose UID and enter the UID of the camera, and then click Add.

Find the UID of your camera referring to How to Find the UID for Your Reolink Device

Add device add

Step 3. Read the power-saving tip for battery-powered cameras and click Confirm.

Power saving tips

Step 4. Select Wi-Fi, then click Confirm. Follow the on-screen instructions to proceed to the next step.

network connection

reset device

Step 5. Enter the Wi-Fi information to configure Wi-Fi for this camera, then click Next.

Note: Some camera models only support 2.4GHz Wi-Fi. Please refer to the actual specifications on the official website and the Reolink Client for accurate details. If there is no indication of both 5GHz and 2.4GHz on Enter Wi-Fi Info Page, it means the camera only supports 2.4GHz.

6Enter WiFi info

2.4g wifi client

Step 6. Place the camera in front of the QR code on your PC at a distance of about 20cm (7.87 inches inches) to let the camera scan the QR code. After hearing a beep sound, click Next.

scan QR

Step 7. Wait around 60 seconds for the camera to connect to the router. If you heard “connection to the router succeeded”, select correspondingly and click Next. If not, click Failed to connect to the router and do as told.

conect to router