If you want to set up smart person/vehicle detection for your camera via the Reolink app, please follow the steps below.
Applies to: Argus 3 Pro, Argus 3 (2K), Reolink Go Plus, Reolink Go PT Plus, Reolink Duo, Reolink Duo 4G, Reolink Duo 2, Reolink Duo 2 LTE, Keen Ranger PT
Step 1. Please launch your Reolink APP and go to the device settings and tap the Detection Alarm button.
Step 2. Tap Detection Zone, then you could set person detection zone, vehicle detection zone, and motion detection zone.
Please note that you can set the detection zone for persons, animals, and others for Keen Ranger PT.
Step 3. Select no-alarm areas within the monitoring range with the Pen. You also can use the Eraser to modify the setting. And then tap Save to save the setting.
Step 4. Go back to the Detection Alarm page and choose Sensitivity -> Smart Detection, drag the bar of Person Motion and Vehicle Motion to adjust the sensitivity. And then tap Save to save the setting.
Please note that you can set the detection sensitivity for person motion and animal motion for Keen Ranger PT.
Step 4. Go back to the Detection Alarm page and choose Object Size. Tap Minimum Object/Maximum Object, then use your finger to zoom in or out on the yellow or blue frame in the screen to adjust the size you want to set, then tap Save. You can set object size for Person Motion or Vehicle Motion or both. Tap the Rubbish Bin icon if you want to delete the object size settings and then tap Save to save the settings.
Please note that you can set the object size for person motion and animal motion for Keen Ranger PT.