163 results for "e1 zoom firmware" in Troubleshooting

• Cameras Auto Reboot Itself (E1 series and C series)

  2
  • 1. Reolink Support
    2. Troubleshooting
    3. Reset/Reboot Issues
  • August 16,2020 11:39

  Applies to: E1, E1 pro, E1 zoom, E1 Outdoor, C1, C2, C1 pro, C2 pro. Description of the phenomenon:   1. C series cameras make pan and tilt randomly. 2....

• Test Succeeded but Connection Failed When Adding Camera to Synology

  0
  • 1. Reolink Support
    2. Troubleshooting
    3. 3rd party/RTSP/Other Issues
  • August 12,2020 08:05

  Applies to: All IP cameras( Reolink E1 Pro& E1 Zoom are included) except for all Reolink battery-powered cameras, Reolink E1, B400, D400, B800, D800,...

• Reolink Firmware Update Failed

  51
  • 1. Reolink Support
    2. Troubleshooting
    3. 3rd party/RTSP/Other Issues
  • June 18,2019 04:14

  Then, try again to upgrade the firmware. Troubleshooting: If the upgrade fails, consider switching to a different software platform to perform the firmware...

• Camera Can’t Focus after Firmware Upgrading

  0
  • 1. Reolink Support
    2. Troubleshooting
    3. Image issues
  • August 10,2020 07:52

  Solution: The firmware files are categorized by different hardware versions in the firmware center: Please go to Firmware Center and find the correct...

• Fail to Connect E1 Series Cameras in LAN

  1
  • 1. Reolink Support
    2. Troubleshooting
    3. Connection issues
  • August 07,2020 01:34

  Refer to Introduction for Status LED of Reolink E1 Series Cameras for more information about the status LED of the camera. Applies to: E1 series cameras If...

• E1 Series Cameras Cannot be Power on

  2
  • 1. Reolink Support
    2. Troubleshooting
    3. Power-on/Charging/Battery Issues
  • August 14,2020 11:18

  Applies to: E1 series cameras There are several possible causes for failing to power Reolink E series cameras. You may follow the troubleshooting tips listed...

• Camera Stops Working after Firmware Upgrade

  0
  • 1. Reolink Support
    2. Troubleshooting
    3. Power-on/Charging/Battery Issues
  • August 10,2020 07:49

  If the camera stops working after the firmware upgrade, please refers to the steps below to check. Cause 1: The camera is accidentally powered off during the...

• Battery-Powered Cameras Fail to Upgrade Firmware Online

  2
  • 1. Reolink Support
    2. Troubleshooting
    3. 3rd party/RTSP/Other Issues
  • August 17,2020 10:37

  Applies to: Reolink Battery-Powered Cameras  If you fail to upgrade the camera’s firmware online (refer to Upgrade Battery-powered Cameras Manually), the...

• Blurry Image for Auto-Focus Lens Camera

  2
  • 1. Reolink Support
    2. Troubleshooting
    3. Image issues
  • August 07,2020 11:37

  Cause 4: Update the camera to the wrong firmware or the firmware bug Solution: If your image was blurry or out of focus right after the firmware update,  it...

• FTP Test Succeeded, But the Picture/Video Cannot be Uploaded

  0
  • 1. Reolink Support
    2. Troubleshooting
    3. 3rd party/RTSP/Other Issues
  • August 10,2020 07:24

  Solution: check the firmware to make sure the firmware is up to date. Applies to: All IPC except the battery-powered cameras and E1, E1 pro, Reolink Lumus...