200 results for "power adapter" in Troubleshooting

• Reolink Solar Panels Not Working

  • 1. Reolink Support
    2. Troubleshooting
    3. Power-on/Charging/Battery Issues
  • May 09,2018 05:09

  Disable Continuous recording & pre-recording (Supported on some models only): Continuous recording and pre-recording will increase the camera’s power...

• Power & Connection Tips for AC-Powered Reolink Cameras

  • 1. Reolink Support
    2. Troubleshooting
    3. Connection issues
  • May 08,2025 01:41

  Adapter? Reolink Elite Floodlight WiFi and TrackFlex Floodlight WiFi During the first-time setup, power the camera using a 5V/2A DC adapter with the...

• Reolink NVR not Powering on

  • 1. Reolink Support
    2. Troubleshooting
    3. Power-on/Charging/Battery Issues
  • August 12,2020 09:39

  Ensure you're using the original Reolink NVR power adapter. If it has an indicator light, ensure that the light is illuminated. 2. Change to other compatible...

• Reolink Camera Not Powering on

  • 1. Reolink Support
    2. Troubleshooting
    3. Power-on/Charging/Battery Issues
  • September 20,2018 09:51

  Please change other compatible power supply devices to see if it helps. Including but not limited to: DC (adapter, socket), transformer, PoE (switch,...

• Battery-Powered Camera Starts Recording Too Late

  • 1. Reolink Support
    2. Troubleshooting
    3. Record/Playback/Download issues
  • August 12,2020 11:08

  Applies to: Reolink battery-powered cameras Issue Description: The time the battery-powered camera starts to record is always later than the PIR is...

• Reolink Lumus Camera Cannot be Power on

  • 1. Reolink Support
    2. Troubleshooting
    3. Power-on/Charging/Battery Issues
  • August 14,2020 11:43

  Defective power supply Solution: Please use the original adapter and change another outlet to see if it works.   Cause 2. Defective camera hardware ...

• Battery-Powered Cameras Auto Reboot Itself

  • 1. Reolink Support
    2. Troubleshooting
    3. Reset/Reboot Issues
  • August 11,2020 08:25

  When the battery is low, it may cause unstable power supply, leading to random restarts. Use a DC 5V 2A adapter to fully charge the camera, then monitor the...

• POE Cameras Cannot Be Powered on by POE NVR

  • 1. Reolink Support
    2. Troubleshooting
    3. Power-on/Charging/Battery Issues
  • August 14,2020 12:29

  The POE module of the camera fails to get powerSolution: Please use the DC adaptor to power the camera on. Note: The power adaptor may refer to What is the...

• Fail to Log in to Reolink Battery-Powered Cameras when Remotely Accessing them?

  • 1. Reolink Support
    2. Troubleshooting
    3. Connection issues
  • August 14,2020 01:35

  Cause 1: The camera is not powered on properly Solution 1: Please use a DC 5V/2A power adapter to charge it to check whether the camera can be powered on...

• Sometimes Fail to Connect to Battery-Powered Cameras When Using 4G Network

  • 1. Reolink Support
    2. Troubleshooting
    3. Connection issues
  • August 14,2020 12:27

  Cause 1: The Camera is Not Powered On Properly Solution 1: Please use a DC 5V/2A power adapter to charge it to check whether the camera can be powered on. ...