119 results for "factory reset" in Troubleshooting

• Fail to Connect Reolink GO/GO PT to Network after the Cancel of AT&T 3G Service

  • 1. Reolink Support
    2. Troubleshooting
    3. Connection issues
  • February 14,2022 11:20

  Delete the upgrading file, or format the SD card via the camera in case the camera will enter upgrading mode again when it’s reset to factory default.   If...

• Camera Keeps Saying Please Release the Reset Button

  • 1. Reolink Support
    2. Troubleshooting
    3. Reset/Reboot Issues
  • August 14,2020 11:38

  Apply to: Argus series, E1 series cameras and Reolink Lumus If you keep hearing "Factory reset succeeded. Please release the reset button", but you do not...

• Reolink Camera Keeps Resetting and Losing Configuration

  • 1. Reolink Support
    2. Troubleshooting
    3. Reset/Reboot Issues
  • August 14,2020 11:29

  The camera periodically loses all configurations and resets to factory settings, or you might frequently see a password error message requiring you to create...

• Troubleshooting Guide: Reolink Reset Button Not Working

  • 1. Reolink Support
    2. Troubleshooting
    3. Reset/Reboot Issues
  • October 17,2023 06:31

  Issue Description of Reolink Reset Button Not Working Your camera cannot be hard reset or doesn't respond to a hard reset—no sound or light. There could be...

• IP Cameras Stop Working

  • 1. Reolink Support
    2. Troubleshooting
    3. Power-on/Charging/Battery Issues
  • June 21,2018 02:28

  Factory reset your camera, you can refer to the link here to factory reset.

• Why Is My Reolink Camera Pink/Purple/Green

  • 1. Reolink Support
    2. Troubleshooting
    3. Image issues
  • August 08,2020 10:01

  Reset the camera to factory settings. Refer to How to Hard Reset Device by Pressing the Reset Button If the camera is back to normal after resetting or...

• The Screen is Grey

  • 1. Reolink Support
    2. Troubleshooting
    3. Image issues
  • August 15,2020 07:16

  Please hard reset this camera and set up from the factory status. If still the same, please contact Reolink support for your warranty.

• Blurry Image for Fixed Lens Cameras

  • 1. Reolink Support
    2. Troubleshooting
    3. Image issues
  • August 07,2020 11:14

  Please try the hard reset to check again, and contact Reolink support for your warranty.        Cause 4: Lens defected from factory or transitway Solution:...

• E1 Series Cameras Cannot be Power on

  • 1. Reolink Support
    2. Troubleshooting
    3. Power-on/Charging/Battery Issues
  • August 14,2020 11:18

  Defective Camera Hardware Solution: Please reset the camera to default factory settings Then please check whether there is a voice prompt or whether the...

• Reolink Lumus Camera Cannot be Power on

  • 1. Reolink Support
    2. Troubleshooting
    3. Power-on/Charging/Battery Issues
  • August 14,2020 11:43

  Defective camera hardware Solution: Please reset the camera to default factory settings. Then please check whether there is a voice prompt or whether...