119 results for "RESET&#32" in Setup

• How to Import APN information to Reolink 4G Cameras

  • 1. Reolink Support
    2. Setup
    3. Network Settings
  • May 04,2021 09:15

  Please make sure your SD card is 16GB or 32 GB in FAT 32 format.4. Power off the camera, then install the SD card and power on the camera. Please wait for...

• How to Manually Upgrade Firmware for Reolink WiFi Battery-Powered Cameras

  • 1. Reolink Support
    2. Setup
    3. Others
  • January 30,2023 11:58

  Insert the SD card into the camera and then make sure that the camera is saying the welcome voice prompt.If the camera is not saying welcome voice prompt,...

• How to Manually Upgrade Firmware for Reolink 4G Cameras (With Smart Detection)

  • 1. Reolink Support
    2. Setup
    3. Others
  • January 30,2023 12:12

  When the red LED is on, use a reset needle or something sharp (like a toothpick) to hold the reset button for about 2 seconds.The red LED will go off, please...

• How to Manually Upgrade the Firmware for Reolink Go/Go PT

  • 1. Reolink Support
    2. Setup
    3. Network Settings
  • September 29,2018 12:56

  Insert a micro SD card into the camera and hold the reset button.Put the micro SD card into the camera, then insert the battery to power it on, when the red...

• How to Manually Upgrade the Firmware for Reolink Go Plus

  • 1. Reolink Support
    2. Setup
    3. Others
  • May 24,2022 02:49

  Insert the SD card into the camera and hold the reset button. Put the micro SD card into the camera, then insert the battery to power it on, when the red LED...

• How to Hard Reset Device by Pressing the Reset Button

  • 1. Reolink Support
    2. Setup
    3. Reset Cameras/NVRs
  • April 16,2020 02:21

  Press the Reset button for 10 seconds until you hear the buzzing “bee”.The Reset button of 4-Channel and 8-Channel PoE NVR:Here is a video for your reference...

• How to Reset Reolink Lumus

  • 1. Reolink Support
    2. Setup
    3. Reset Cameras/NVRs
  • May 31,2020 06:40

  These are the steps to show you how to reset the Reolink Lumus series. Step 1. Power the camera. Step 2. Insert the reset needle into the reset hole of your...

• How to Reset Duo Series

  • 1. Reolink Support
    2. Setup
    3. Reset Cameras/NVRs
  • May 14,2022 02:38

  Find the reset hole( it is right next to the micro SD card slot). And then insert the reset needle into the reset hole of your camera. Step 4. Find the reset...

• How to Reset Argus 2E

  • 1. Reolink Support
    2. Setup
    3. Reset Cameras/NVRs
  • August 15,2022 10:00

  This article will show you how to reset the camera Argus 2E. The reset button is located in 1. Step 1. Turn ON the power button to power the camera. Step 2....

• How to Reset Reolink Floodlight

  • 1. Reolink Support
    2. Setup
    3. Reset Cameras/NVRs
  • February 02,2023 04:30

  Note:  Resetting the device by pressing the Reset button will restore your device to factory default settings.  Step 1. Power on the floodlight. Step 2. Here...