Applies to: All Reolink cameras with Micro SD card slot (exclude battery-powered cameras, Reolink E1 and Reolink E1 Pro).
Here we'll guide you to quickly set up or change the record schedule for Reolink cameras.
Step 1. Log into the camera via a web browser and go to Device Settings -> Recording -> Advance page.
Step 2. Click on the grids to set the schedule as you need, then click OK to save the settings. One grid means one hour.
1. The Overwrite button is ticked by default, and under this mode, the new recordings will cover the old videos automatically if the micro SD card is full.
2. If you want to extend the record time after the motion events happened, you can choose the Post-Record button to set the time.
3. The green grid means that the device will record to micro SD card when motions detected, while the white one means “don’t record”.
4. The recording schedule of C1, C2, C1 Pro, C2 Pro and cameras which are connected to NVR could be set as continuous record, while other devices start to record only when motions detected.
You may also configure record schedule of Reolink cameras via Reolink App, Reolink Windows or Mac Client. Check details in: