How to Set up Push Schedule for Cameras

Setting up a push schedule allows you to customize alerts for specific motion events, ensuring that you stay informed without unnecessary distractions. This article will provide you with tutorials on how to set up a push schedule for your camera.

Applies to: All Reolink cameras except Argus 2, Argus Pro, Argus 2E 2MP, Argus 3 2MP, Argus PT 2MP, Argus Eco 2MP, Reolink Go, Reolink Go PT, B400, D400, B800, D800

Please note that for the battery-powered cameras without the person/vehicle detection function, you can only enable/disable the push button. The push schedule is the same as the PIR schedule.

For the other Reolink cameras, refer to the following steps to set the push schedule.

Via Reolink App
Here is a video for your reference.

Push Schedule

Step 1. Launch the Reolink App > Device Settings > Push Notifications.

Step 2. Enable Push Notifications > Choose Schedule > Customize detection type and schedule for push notifications.

Select the time column to Enable the schedule page of each day, you will see two options at the bottom: Enable and Disable. You may choose one of them, then you click each grid to set the push schedule up.

Please note that you can set a push schedule for animal detection, but not vehicle for KEEN Ranger PT.
Notes:
1. One grid represents one hour.
2. Tap Copy to copy the same schedule settings to other days.
3. You can set different detection types for your camera, but the detection types will vary from different models. For the model which does not support smart detection, there is no detection type that can be chosen.
Step 3. Press the Save button on the top right to save the settings.

Critical Alerts

Only on the iOS App, you can set to receive critical alerts when your iPhone is muted or Do Not Disturb is on.

When you enable Allow Critical Alerts, there is a message that will pop up to guide you on how to set the critical alerts on your iPhone.

Please tap Settings.

Then choose Notifications on your iPhone, and enable Critical Alerts.
Via Reolink Client

Here are the two videos for your reference.

*How to set up push notification schedule:

*How to set up push notificaiton for NVR on Reolink Client:

Note: Please make sure that you've enabled Push on your phone before setting the push schedule.
Step 1. Go to Device Settings > Surveillance > Push page.

Step 2. Turn on Push Notification button and complete the Schedule settings. Choose the push notification type and select the channel you need if it is an NVR.

Enable means to choose the squares to set the schedule as you need, then click Save to save the settings. You may also drag the mouse to choose the schedule quickly. Otherwise, you can disable the time to not receive the push notifications, and please note that one square means one hour.

Step 3. Click the Save button. If it is an NVR, you may also click Apply to Other Cameras to copy the schedule to other channels quickly, and then click the Save button.

Note: The detection type will vary from different models of your camera. Please choose either of them or combine two options/all of them together according to your needs.
Via Reolink Web browser

Applies to: All Reolink cameras/NVRs (exclude Reolink Battery-powered cameras, Reolink E1, Reolink E1 Pro, Reolink Lumus, and add-on cameras).

Step 1. Log in to your camera via a web browser. Click the gear icon on the top right to get to the device settings page.

Step 2. Click Sureveillance > Push. Then you can customize the schedule by filling the grids.

If your camera or NVR supports smart detection, you can also choose different detection types.

Step 3. Click or Save to save the configurations.

If the web interface of your camera is an old version, you can refer to the steps below.

Step 1. Log in to your camera via web browser and go to the Device Settings page.

Step 2. Go to Network >Advance >Push page, set the push schedule for your device, and click OK to save the setting.
Via Reolink NVR (new UI)

Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36 and RLN12W.

Here is a video for your reference.

Step 1. Connect the NVR to a monitor/TV, log into the NVR, and go to the Settings page.

Step 2. Click Surveillance and enable Push Notifications.

Step 3. Click Daily Schedule of Push Notifications to set up.

Step 4. Choose the channel you want to set up at the top.

Step 5. Enable the toggle switch. And set up a push schedule for the camera.

Note: If you don't want to receive push notifications from this camera, just turn it off.