How to Add Reolink IP Cameras to Reolink PoE NVR(New UI)

Applies to: All Reolink POE NVR(NEW UI)

Reolink PoE NVR allows you to record videos for Reolink IP cameras without using a computer. To do that, you need to add the camera to the NVR first. The cabling for PoE NVR is shown as below.

You may then follow the steps below to add Reolink cameras to Reolink PoE NVR.

Step 1. Connect your Reolink IP cameras to the Reolink PoE NVR. There're two different ways of powering your IP cameras:

a. Power the IP cameras via the PoE NVR. You may connect the IP cameras to the PoE NVR directly via an Ethernet cable. (An Ethernet cable is also needed during the initial setup for WiFi cameras)

b. Power the IP cameras using a DC power adapter. For PoE cameras, you may connect the camera to the same router that the NVR is connected to; for WiFi cameras, select the WiFi of the router that the NVR is connected to. 

Note: Make sure all the IP cameras you want to add to the NVR are connected to the same network (LAN) as the NVR. Otherwise, the cameras won’t be shown on the scanned list and cannot be automatically added to the NVR.

Step 2. Log in to your NVR, and go to IP channel.

Step 3. Select Auto Add, all the cameras in the same LAN can be automatically shown on the list.

Note: The number of cameras that can be added to the NVR may vary depending on the NVR channel numbers of the NVR.

Step 4. If you have never changed the password of the IP cameras (the default password of the IP camera is blank) and there are enough channels for all the cameras, the camera will be added to NVR automatically. 

However, if you have changed the login passwords of the IP cameras or there is no spare channel to display all the IP cameras, you may need to go through a few more steps.

Step 5. If you have an 8-channel NVR and more than 8 IP cameras, please choose the one of 8 you want to add to the NVR and click"replace" to add the camera to this channel,

Note: You may assign the IP cameras to any channel you want; but you cannot have two cameras on the same channel, or configurations would fail to be saved.

Select one of the camera you want to add this channel and click"next" to add.

Step 6. If you have changed the User Name and the Password of your cameras, please find this camera display "incorrect account name and password" then click" modify" and use the soft keyboard input the required information.

Step 7. Click OK to save and apply the configuration.