This article introduces the maintenance system settings on Reolink NVRs with monitor connected.
Applies to: All Reolink NVRs
Reolink NVR (New UI)
Log in your NVR via the monitor, go to Settings > System > Maintenance.
- Enable auto-reboot: check on this option to set up auto-reboot for your NVR system.
- Auto reboot time: select the date and time of auto-reboot.
- Auto upgrade: automatically upgrade the firmware of your NVR to the latest.
- Check for the latest version: check if there is any newer firmware version for the NVR system.
- Update: upgrade the firmware of your NVR to the latest.
- Restore: restore the NVR back to default settings.
- System log: check the activities of the NVR system, like startup, login, logout.
- Export diagnostic information: get the diagnostic information of the NVR system.
Reolink NVR (Old UI)
Log in to your NVR via the monitor, go to Menu > System > Maintenance page:
There are five options on this page:
- Enable auto reboot: check on this option to set the auto reboot for your device.
- Auto reboot at: select the date and time of auto reboot.
-
Upgrade: upgrade the firmware of your NVR to the latest one.
Note: Please note you also can upgrade the firmware for the cameras connecting to the NVR via PoE NVR. - Default Settings: click Restore to restore your device.
- Configuration: click the Export/Import button to export/import config files. Please note the NVR with the new firmware couldn't support the Import function.