How to Set up OSD via Reolink NVRs (New UI)

Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36, NVS36 and RLN12W, NVS12W.

Step 1. Log in the NVR and go to Settings > Camera page:

Step 2. Select the channel (Camera No.) and Display. Configure the OSD settings as you need. Then you may click Apply to Other Cameras to copy the same settings to other channels.