How to Set up the Display Settings (OSD) for Reolink Cameras

OSD means On-screen display content, it includes camera name, date/time, position settings, more distinct OSD, watermark, and privacy mask.

Applies to: All Reolink cameras and NVRs

• Camera Name: Users can set the camera name and choose to display it on the video or not.
• Date/Time: Users can modify the camera date/time and choose to display it on the video or not.
• Position settings: Users can change the OSD content (including the name and date/time) position on the screen.
• More Distinct OSD: Users can enable it to make the OSD content more distinct on the screen when the background is white.
  
  Note: This option is only for the old hardware cameras. For the new hardware cameras, it will add a black border for the content automatically when the background is white.
• Watermark: Users can enable/disable the watermark (shows the Reolink logo) on the screen.
  
  Note: This option is only for the new hardware cameras. Argus 2/Pro does not support this option.
• Privacy Mask: Users can set the privacy mask for the camera to mask some areas.
  
  Note: Motions in the masked area will also be detected (except for the AI detection of the AI battery-powered cameras) if you didn't clear the motion detection area for it . And the camera in the WiFi NVR kit doesn't support this option.

The basic setup path is Device Settings > Display OSD, also, you may refer to:

• Set up the OSD via Reolink Client

• Set up the OSD via Reolink App

• Set up the OSD via Reolink PoE NVR

• Set up the OSD via Reolink NVRs (New UI)

• Set up the OSD via the Web Browser