A Preset is a user-defined position of the camera‘s pan tilt and zoom settings. Creating camera presets in advance allows it to easily go to the wanted monitoring positions
Applies to: RLC-423, C1, C2, C1 Pro, C2 Pro, E1, E1 Pro, E1 Zoom, E1 Outdoor, RLC-523WA, RLC-823A, RLC-823A 16X, Reolink TrackMix, TrackMix WiFi, and TrackMix PoE
Step 1. Go to the live-view page of the camera, and tap the PTZ icon. Aim your camera at a specific area by panning, tilting, or zooming the camera. For example, the camera has been adjusted to look at the floor in the picture below:
Step 2. Tap the Preset icon. There are no presets on this page yet as you can see in the picture below.
Step 3. Then tap the Add button. Now you could name the preset. Then click Confirm.
Step 4. You can repeat the previous steps to create more presets. If you tap on the preset, the camera will turn to the preset point immediately.
Step 5. You could also edit the preset's name or delete the preset.
Comments
0 comments
Article is closed for comments.