How to Add Reolink Devices to Reolink App

Adding your Reolink devices to the Reolink App is quick and easy, whether you are adding cameras, NVRs, Home Hub, or IoT devices that have already been set up. This guide introduces four methods to add devices to the App and also covers some common questions you may encounter.

👉 For instructions on setting up a new device for the first time, see: How to Initially Set up Reolink Devices.

Applies to: All Reolink devices.

Table of Content

1. 4 Methods to Add Reolink Devices to the App
   • Method 1: Add via QR Code or UID (Recommended)
   • Method 2: Add via LAN (Local Network)
   • Method 3: Add via IP Address (Advanced)
   • Method 4: Add via Link (Advanced Sharing)
2. FAQ

4 Methods to Add Reolink Devices to the App

🔹 Method 1: Add via QR Code or UID (Recommended)

Advantages: Fast, simple, supports local & remote.
Conditions: Need QR code/UID access.

The UID is the device’s unique ID. The QR code stores this information, so scanning or entering the UID lets the App quickly recognize your device. UID starts with 9527; some older models start with XCPTP, see How to Find the UID for Your Reolink Device.

• Steps:

  1. Tap the “+” icon in the Reolink App.

  2. Scan the device’s QR code (or check your photo album if you saved it) Or tap Manual Input > UID and enter the UID, tap Next.

  3. Enter the device password (for non-battery models, the default username is admin) to access it.

  

🔹 Method 2: Add via LAN (Local Network)

Advantages: Quick discovery, automatic, no manual input.
Conditions: Works only when device and phone/tablet are on the same LAN.

In this method, the Reolink App automatically detects devices connected to the same local network (LAN). This makes it easy to add devices without knowing the UID or IP address.

• Steps:

  1. Ensure your phone/tablet and device are on the same LAN (subnet).

  2. Tap the “+” icon > LAN > Add.

  3. Enter the device password (for non-battery models, the default username is admin) to access it.

  👉 For detailed information, see: How to Add Reolink Products in LAN via Reolink App

  If Add Devices Automatically is enabled, devices will appear automatically in the App home interface.

  

🔹 Method 3: Add via IP Address (Advanced)

Advantages: Works without UID/QR code, supports local & remote.
Conditions: Requires IP knowledge; port forwarding needed for remote access. Not applicable to battery-powered cameras.

This method connects by using the device’s IP address. For local access, the App communicates directly with the IP. For remote access, router port forwarding is required to allow external connections.

• Steps:

  1. Find the device IP address:

  • If already added in another Reolink software: Go to Settings > Network > IP Address, see How to Check Network Status of Reolink Cameras/NVRs.
  • If not yet added: Log in to your router and check the connected devices list to find the device IP.

  2. In the App, tap “+” > Manual Input > IP, enter the IP and tap Next. (The App uses the media port which by default is 9000)

  3. Enter the device password (the default username is admin) to access it.

  👉 For remote access via IP, you need to configure port forwarding first on your router. See How to Forward Ports on Router Interface for Reolink Products.

  

🔹 Method 4: Add via Link (Advanced Sharing)

Advantages: No need for password, flexible sharing, supports local & remote.
Conditions: Only available for devices supporting Advanced Sharing.

Advanced Sharing allows the admin account to create user credentials and generate a secure sharing link. This makes it possible to share device access without password.

• Steps:

  1. On the original admin account, create a new admin/user and generate a sharing link.

  2. In the App, tap “+” > Manual Input > Link.

  3. Paste the link and tap Next to add the device.

  👉 For information on which devices support Advanced Sharing and how to configure it, see: How to Share Your Device with Others.
  

FAQ

• Q1. Can I add multiple Reolink devices to the same App?

  Yes, there is no limit. You can add devices locally on the same network, or remotely as long as the device is connected to the internet. Remote devices can be added using their UID or a sharing link.

• Q2. What password should I enter when adding a device?

  The password is the one you created during device initialization. If you forget it, see: What Should I Do If I Forget the Password to Log in to Cameras/NVRs/Home Hub.

• Q3. Why can’t I see my cameras when not connected to the same Wi-Fi?

  Refer to the relevant guide for your device to troubleshoot remote access:

  Camera: Can't View Security Cameras Remotely

  NVR and Home Hub: Can't Access Reolink NVR/Home Hub Remotely.

• Q4. How can I add my Reolink device to the PC or laptop?

  Refer to: How to Add Reolink Products to Reolink Client.

• Q5. I want to add a camera to my Reolink NVR or Home Hub.

  This article describes adding the Reolink NVR or Home Hub to the App. To add cameras to your Reolink NVR or Home Hub, refer to the following guides:

  NVR: How to Add Reolink Camera to NVR

  Home Hub: How to Add Reolink Camera to Home Hub Series

In Summary

Reolink devices can be added to the App in multiple ways: via QR code or UID, via LAN, via IP address, or via a sharing link. Each method has its advantages and considerations, depending on your network setup and device type.

If none of the above methods work, please take a screenshot of any error messages, note the methods you have tried, and click Submit a Request at the bottom to contact Reolink Support.