In this section, we will guide you on setting up smart detection including smart sensitivity, object size, and non-detection zone for your battery-powered cameras via the Reolink Client.

Applies to: Argus 2E (3MP), Argus Eco (3MP), Argus Eco Pro, Argus Eco Ultra, Argus 3 Pro, Argus 3 (2K), Argus 3 Ultra, Argus PT (2K), Argus PT Lite, Argus PT Ultra, Argus Track, Reolink Go Plus, Reolink Go PT Plus, Reolink Go Ultra, Reolink Go PT Ultra, Reolink Go Ranger PT, Reolink Duo (battery), Reolink Duo 4G, Reolink Duo 2 (battery), Reolink Duo 2 LTE, Keen Ranger PT, Reolink TrackMix (battery), Reolink TrackMix LTE, Reolink TrackMix LTE Plus.

Note: To set up the Smart person/vehicle detection feature via the PC client for the battery-powered cameras, please make sure the PIR is ON and also update your Client to the latest version (version 8.1.7 or above)

Step 1. Please open your Reolink Client and go to the device settings and find the Camera tab.

Step 2. On the camera device settings page, please click Alarm Settings.

smart_battery_1.png

Step 3. To set up the Smart Detection Sensitivity, please refer to the article below.
How to Set Smart Person/Vehicle Sensitivity for Battery-powered Cameras via Reolink Client(New Client)
smart_battery_2.png

Step 4. To set up the Object Size, please refer to the article below.

How to Set up Object Size for Battery-powered Cameras via Reolink Client (New Client)

smart_battery_3.png

Step 5. To set up the Detection Zone, please refer to the article below.

How to Set Detection Zone for Battery-powered Cameras via Reoink Client(New Client)

smart_battery_4.png