This article aims to offer you methods to set up preset points and a patrol route for different Reolink cameras.
Applies to: E1, E Series E320, E1 Pro, E Series E330, E1 Zoom, E Series E340, E1 Outdoor Series (E1 Outdoor, E1 Outdoor PoE, E Series E560P, E1 Outdoor Pro, E Series E560, E1 Outdoor S, E Series E550, E1 Outdoor CX), RLC-523WA, RLC-823 Series (RLC-823A, RLC-823A 16X, RLC-823S1, P840, RLC-823S2, P850, RLC-823S1W), RLC-81PA, P330P, RLC-830A, P830, Reolink TrackMix Series (TrackMix, TrackMix LTE, TrackMix WiFi, TrackMix PoE, TrackMix LTE Plus, TrackMix Wired LTE), Argus PT Ultra, Argus Series B440, Go PT Plus, Go PT Ultra, Reolink KEEN Ranger PT, Reolink Go Ranger PT, Go Series G450, Argus Track, Argus Series B730
- Check out this article to find out which features (Preset/Patrol) your model supports: Do Reolink PT/PTZ Cameras Support Preset/Patrol/Auto-tracking
- Reolink cameras can’t set a schedule to control the Patrol function, you will need to start/stop the patrol manually.
1. How the Patrol works
Before setting up Patrol, you may want to know how the patrol works. Refer to the link below:
How the Patrol Works on Reolink Cameras
2. Set up the Preset
If you want to set the Patrol for your camera, you will need to set the Preset first, and the following guidelines are about how to set up the Preset on different platforms:
How to Set up the Preset via Reolink NVR (New UI)
Set up the Preset via Reolink NVR
Set up Presets via Reolink Client (New Client)
3. Set up a Patrol
After setting up the Presets. Follow the guidelines below to set up the Patrol on different platforms: