Here we'll guide you to quickly check the firmware version of your Reolink cameras via a Web Browser.

Applies to: All Reolink cameras except battery-powered cameras, Reolink E1, Reolink E1 Pro, and Reolink Lumus.

Note: The steps below only apply to standalone cameras. If your camera is directly connected to Reolink NVR, please check its system information on the NVR via a monitor. See: How to Find out System Information via Reolink NVR (New UI).

Step 1. Log in to your camera via Web Browser.


Step 2. Click the gear icon on the top right to get to the device settings page.


Step 3. Click Camera > Info. Then you can check the model, UID, hardware, and firmware No. etc on the page.  


If the user interface is with an older version, please check the steps below. 

Step 1. Log in to your camera via a web browser and go to the device settings page.

Step 2. Click  System > Information, then you can check the Hardware Ver. and Firmware Ver. of your camera. 


You may also refer to the following methods to find out the firmware information of your Reolink products.