Here's a quick guide for your reference to set up DDNS for your cameras or NVRs via a web browser. 

Applies to: All Reolink cameras and PoE NVRs except the battery-powered ones, Reolink Lumus, Reolink E1, and Reolink E1 Pro.

Step 1. Log in to your camera via a web browser. Click the gear icon on the top right to get to the device settings page.

log-in-on-IE-browser.png

Click_settings_icon_web.png

Step 2. Click Network > Advanced. Toggle the switch to enable DDNS. 

enable_DDNS_new_ui.png

Step 3. Click DDNS settings. Choose the DDNS Server Type, and enter the Server Domain Name, Username, and password. 

Click Save to save the configurations. 

DDNS_settings.png

If the web interface of your camera is an old version, you can refer to the steps below. 

Step 1. Log in to your camera via a web browser and go to the device settings page. 

Step 2. Click Network >Advanced >DDNS.

Step 3. Enable DDNS and choose No-IP or DynDNS as the DDNS Server type. Then input the Domain name, User Name, and Password and click OK to save the settings.

old_DDNS_settings.png

Note:
  1. We supported both DDNS Server Type: No-IP and DynDNS.
  2. Check the Media port of your Reolink device and forward the Media port on the router interface. If you meet a problem when you forward the port for your product on the router, you can contact the router supplier for further assistance.