Follow the steps below to remotely access Reolink products via DDNS.
Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

Step 1. Go to Menu > Network > Advanced > DDNS page.

Step 2. Enable DDNS and choose No-IP or DynDNS as the DDNS Server type. Then input the Domain name, User Name, and Password, Confirm the password, and click Apply to save the settings.

POE-main-menu.jpg

ddns.png

ddns2.png

Note:
  1. We supported both DDNS Server Type: No-IP and DynDNS.
  2. Check the Media port of your Reolink device and forward the Media port on the router interface. If you meet the problem when you forward the port for your product on the router, you can contact the router supplier for further assistance.