This article will show you how to manually record via PoE NVR with a monitor connected.

Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

Note: This function can only work when the Recording Schedule is disabled.

Step 1. Log into the PoE NVR on the monitor and select the Manual record icon on the Menu bar. 

manual record.png

Step 2. If the recording schedule is OFF, you can see a RED OFF button next Schedule. Now you can manually set the record start or stop by clicking the circle dot.

manal_record_on_poe_nvr.png

Note: If the schedule recording is ON, you can see a Blue ON Button next Schedule, and the start and stop is in grey, now you can’t set the manual record.