This article will guide you on how to set up maintenance system settings, such as auto reboot, restore, and upgrade firmware via PoE NVRs on the monitor.

Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

Log in to your NVR via the monitor, go to Menu > System > Maintenance page:



There are five options on this page:

  • Enable auto reboot: check on this option to set the auto reboot for your device.
  • Auto reboot at: select the date and time of auto reboot.
  • Upgrade: upgrade the firmware of your NVR to the latest one.
    Note: Please note you also can upgrade the firmware for the cameras connecting to the NVR via PoE NVR.
  • Default Settings: click Restore to restore your device.
  • Configuration: click the Export/Import button to export/import config files. Please note the NVR with the new firmware couldn't support the Import function.