The following steps describe how to find the firmware version information of Reolink PoE NVR and the cameras connected to the NVR.
Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)
Step 1. Log in to the Reolink PoE NVR on a monitor, then click on the button to enter the menu page of the NVR.
Step 2. Click on the System > System Information button, then you can find the Model, Hw No. and Fw Version on this page.
Go to Menu > IP channel, select and click the camera you want, and click Detail.
Then you can find the model, Hw No. and Fw Version on this page.