Applies to: RLN8-410, RLN16-410
You may refer to the following steps to check the firmware version for NVR and the cameras connected to the Reolink PoE NVR.
For NVR
Step 1. Click on the Settings icon to go to the setting page of the NVR
Step 2. Go to the System setting page, and enter the Info page.
Now you will be able to find the hardware and firmware version of your NVR
For cameras
Go to Settings -> Camera page. Choose the camera you want and click More Info in blue.
Comments
0 comments
Article is closed for comments.