Applies to: Reolink PoE NVRs.
The following steps describe how to find the firmware version information of Reolink PoE NVR and the cameras connected to the NVR.
Note: If the UI is different from the following, that will be the new UI on the monitor, you can refer to How to Find out System Information via Reolink PoE NVR ( New UI)
For NVR
Step 1: Log in to the Reolink PoE NVR on a monitor, then click on the button to enter the menu page of the NVR.
Step 2: Click on the System -> System Information button, then you may find the Hw No. and Fw Version on this page.
For cameras
Go to Menu >> IP channel, select and click the camera you want, and click Detail.
Then you may find the Hw No. and Fw Version on this page.
Comments
0 comments
Article is closed for comments.