Applies to: All Reolink cameras except the battery-powered ones, B800, B400, D400, and Reolink E1.
Note: Accessing through 3-party software is currently not available for Reolink battery-powered cameras to save battery life.
QNAP can be used for storing records of Reolink cameras. You may follow the steps below to add Reolink cameras to QNAP.
Step 1. Launch QNAP Surveillance Station, go to Camera Settings -> Camera Configuration, and click Add to add new camera.
Step 2. Uncheck Search camera(s) automatically, and click Next.
Step 3. Fill in the information required, and click Next.
Note: If you choose ONVIF as Camera Brand, the default Port should be 8000. If you choose Reolink, the default Port should be 80. If you have changed the ports, click to see how to find their current value.
Step 4. Check Enable manual recording and Click Next.
Step 5. Setup the recording schedule and click Next.
Step 6. Confirm the settings and click Next.
Step 7. Click Finish to complete the process.
Now you may click Monitor to live view the camera.