All Reolink cameras (except Reolink Argus, Argus2, Keen, Go).
You can use Blue Iris for live view and enable PTZ (pan–tilt–zoom) controls. Before that please check the camera’s local IP address and set the H.264 profile to Baseline.
Set H.264 profile as Baseline
Step 1. Enter the “Device Settings“>>”Recording Encode” page of your camera in the Reolink Client, set H.264 Profile to Baseline(Check the Record Audio if your camera supports);
Add the Reolink camera to Blue Iris
Step 1. Launch Blue Iris and click + button at top/right of the software window or right click and select Add the new camera to add a Reolink camera to Blue Iris.
Step 2. Input the name of the camera and choose Network IP as the connection type. Check “Enable audio” and “Enable motion detector” and click OK to move forward.
Step 3. Please sure you have typed in the correct Username and Password. Then click Find/inspect… button to search the camera in the LAN and choose the Make as Reolink, change the “Discovery/ONVIF port” to 8000then click OK to add.
Step 4. If you are using RLC-423, enable PTZ by clicking the PTZ/Control tab and checking “Enable Pan/Tilt/Zoom and other controls (focus, brightness, etc.)”, don’t forget to set Network IP to ONVIF.