If your Reolink camera has the motion detection feature, you can adjust the sensitivity or even customize the schedule for sensitivity via Reolink App. 

Below are the quick guides showing how to set up motion detection sensitivity via Reolink App. 

Applies to: Reolink cameras with motion detection 

Here is a video for your reference:

Step 1. Launch Reolink App. Tap on the gear icon to go to the Device Settings page of the camera.

tap_settings.jpg

Step 2. Tap Detection Alarm > Sensitivity to set up the sensitivity of motion detection.

tap_detection_alarm.jpgtap_sensitivtity.jpg

Note: If your camera supports smart detection, tap Detection Alarm >  Sensitivity > Motion Detection. 

tap_sensitivity.jpgtap_motion_detection.jpg

On this page, you can also tap Smart Detection to adjust the sensitivity for person/vehicle/pet detection.  

Step 3. Adjust the sensitivity by sliding left or right. 
slide_left_or_right.jpg
Step 4. Tap Add Sensitivity Schedule to customize the sensitivity in different time frames. 
add_sensitivtiy_schedule.jpgedit_schedule.png
Step 5. Tap to set the Start Time and End Time. Tap Confirm to save the time setting. customize_the_start_time_and_confirm.jpgcustomize_the_end_time_and_confirm.jpg

Step 6. Set sensitivity based on your needs. Tap Save on the top right to save the settings.
tap_save_to_save_the_settings.jpg

Note: It’s advised to set it less sensitive during the night in case you receive unwanted false alarms/recordings.
Step 6. If you would like to edit the schedule that you've set up before, tap edit_icon2.pngto edit the schedule. 

edit_schedule_2.jpg

You may also change motion detection sensitivity by using the following methods: