This article will show you how to initially set up Reolink NVRs via the Reolink App step by step.

Applies to: All NVRs.

Here is a video for your reference:

Step 1. Power up the NVR, and plug the LAN port at the back of your NVR into your router with an Ethernet cable to access the internet. Then launch the Reolink App on your phone.

PoE NVR connected to Router

Note: Please make sure the device and your phone are on the same network.

Step 2. Tap the icon in the top right corner. 

Tap on Add button

Step 3. Scan the QR code on your NVR, or tap Manual Input UID to enter the UID of the NVR (a 16-digit number under the QR code). Then tap Next.

MVR code  input UID

Step 4. For security considerations, you need to create a password for the first time.

create NVR password

Step 5. Name your device. Then tap Next.

Name your NVR

Step 6. Initialization finished! You can start to live view now.

complete  NVR Liveview page

Notes:

  1. To access the NVR remotely, ensure that the NVR's UID is enabled. This can be done via the Reolink Client or the NVR's connected monitor: How to Enable UID for Reolink Products
  2. If the camera is directly connected to the NVR or part of a kit, it supports plug and play. After completing the initial setup in the app, you can directly live view the camera.
  3. If the camera is configured as a standalone camera but you want to add it to the NVR, you must connect the NVR to a monitor using an HDMI or VGA cable, enter the preconfigured password of the camera to complete the addition.