Knowing when to restore your Reolink device is crucial, especially if you're facing password issues or transferring ownership. This article will guide you on how to restore your Reolink device using the Reolink App.
Applies to: All Reolink devices.
Table of Content
3. Restore Reolink Device Step-by-Step Instruction
1. Reolink Restore Use Cases
1. You have forgotten the password but still have access to the device.
2. The configuration settings are incorrect, and you wish to restore the device to factory settings.
3. The device is not operating correctly.
2. How Reolink Restore Works
1. "Restore" means clearing the device's configuration and resetting it to factory settings, which also resets the password. This allows you to set a new password.
2. For camera restore, you can remotely restore it without having to take it down; tap "Restore" in the software.
3. Restoring will reset the configuration but will not delete any recordings. For more information on what will be cleared, please refer to this article: Introduction to the Differences between Reset, Restore and Reboot
3. Restore Reolink Device Step-by-Step Instructions
Step 1. Log in to your camera on the Reolink App on your cellphone.
For the standalone camera, tap the icon > Administration.
For Reolink NVR or Home Hub, tap NVR > icon > Administration.
Step 2. Tap the Restore button to restore the device.
Step 3. After the restore, it's normal for the device to show "Connection failed" as it needs to restart.
Step 4. After a few minutes, you'll see a message stating "Uninitialized device". Tap Device initialization to begin setting a new password for your device.
Step 5. Name your device. Then the initialization is complete.