Fiona
- Total activity 37
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 25
Activity overview
Latest activity by Fiona-
Fiona created an article,
How to Set up Email via Reolink Client (New Client)
Applies to: All Reolink cameras and NVRs except for the cameras in the NVR kit You may follow the steps below to set up an email alert for your device on Reolink Client. Step 1. Log in to your came...
-
Fiona created an article,
Fail to Add Reolink WiFi cameras to Reolink WiFi NVR(RLN-211W) on A Monitor
Applies to: C1; C1 Pro; C2; RLC-210W; RLC-211W; RLC-410W; RLC-410WS; RLC-411WS; Lumus(Not recommended); E1 Pro(Not recommended) Note: Please refer to this article to check on the steps of the init...
-
Fiona created an article,
Fail to Add Reolink WiFi Cameras to Reolink WiFi NVR(RLN-210W) on A Monitor
Applies to: RLC- 210W, C1; C1 Pro; C2; Lumus(Not recommended); E1 Pro(Not recommended); RLC-410W-4MP; RLC-410WS; RLC-411WS-4MP; RLC-423WS (A Wi-Fi camera over 5MP cannot be added to RLN-210W) Note:...
-
Fiona created an article,
Fail to Add Reolink WiFi Cameras to Reolink PoE NVR
Applies to: Reolink WiFi camera: C series cameras (C1 Pro, C2, C2 Pro), E series cameras (E1, E1 Pro, E1 Zoom), RLC series cameras (RLC-210W, RLC-211W, RLC-511W, RLC-410W, RLC-410W-5MP, RLC-410WS, ...
-
Fiona created an article,
Always Fail to Connect to Battery-Powered Cameras When Using 4G Network
Applies to: Argus, Keen, Argus 2, Argus Pro, Argus Eco, Argus PT, Argus 3 Note: Make sure when your mobile phone uses the same WiFi as the camera, you can use both fluent and clear stream mode to w...
-
Fiona created an article,
Login Failed when Remotely Accessing Reolink Battery-Powered Cameras
Applies to: Argus, Keen, Argus 2, Argus Pro, Argus Eco, Argus PT, Argus 3 When Reolink App/Reolink Client and the camera are connected to the same Wi-Fi (LAN), you can get access to the camera, but...
-
Fiona created an article,
Fail to Install an Old version Reolink Client on PC
Applies to: All Reolink NVRs and Cameras Guide: If there is a Reolink Client installed on your computer already, but you want to install another Reolink Client with an old version on your computer...
-
Fiona created an article,
Sometimes Fail to Connect to Battery-Powered Cameras When Using 4G Network
Applies to: Argus, Keen, Argus 2, Argus Pro, Argus Eco, Argus PT, Argus 3. Note: Make sure when your mobile phone uses the same WiFi as the camera, you can use both fluent and clear stream mode to...
-
Fiona created an article,
Battery-Powered Cameras Show DNS as 0.0.0.0 via Reolink App or Reolink Client
Applies to: Keen, Argus, Argus 2, Argus Pro, Argus Eco, Argus PT, Argus 3 If the camera's Device/Network Info interface shows DNS as 0.0.0.0 on Reolink App or Reolink Client(Windows/Mac). You may r...
-
Fiona created an article,
Failed to Install Reolink Client(Windows/Mac) on a computer/laptop with Microsoft Windows or MacOS
Applies to: All Reolink NVRs and Cameras While installing Reolink Client on the computer or laptop, the installation could not succeed. Solution: Uninstall the installation file on the computer ...