• Total activity 18
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 9

Activity overview

Latest activity by Hannio
  • Hannio created an article,

    How to Connect PoE Switch, Router and PoE NVR

    Applies to: Reolink PoE camera/NVR. There are different ways to connect the PoE switch, router and PoE NVR. Method 1: You can plug the PoE NVR and the PoE switch to the same router via Ethernet cab...

  • Hannio created an article,

    How to Connect Reolink NVRs to a Network/Router

    Applies to: All Reolink NVRs. 1. Connect NVRs to a router/network via Ethernet cable: All the Reolink NVRs can be connected to the router via Ethernet cable. And there is a LAN Ethernet port on the...

  • Hannio created an article,

    How to Connect WiFi Camera to Phone's Hotspot

    Applies to: Reolink WiFI cameras Please refer to the below video to connect a WiFi camera to the phone's hotspot. To connect the camera to phone's hotspot, please enable a hotspot on your phone fi...

  • Hannio created an article,

    Can Two Cameras be Connected via One Cable

    Applies to: Reoilink PoE cameras. Reolink PoE cameras can be powered over the Ethernet cable, and the Ethernet cable can transmit both data and PoE power. You may run 1 Ethernet cable from the NVR ...

  • Hannio created an article,

    What is DHCP

    Applies to: Reolink cameras and NVRs. The Dynamic Host Configuration Protocol (DHCP) is a network management protocol used on Internet Protocol networks whereby a DHCP server dynamically assigns an...

  • Hannio created an article,

    What are LAN and WAN

    Applies to: All Reolink cameras and NVRs LAN means local area network.  For example, in your home, all the devices are connected to the same router, and the network under your router is a LAN. I...

  • Hannio created an article,

    How to Check Network Status of Reolink Cameras/NVRs

    Applies to: All Reolink cameras and NVRs Please refer to the instructions below to check the Network Status of Reolink cameras/NVRs: Check Network Status via Reolink App Check Network Status via Re...

  • Hannio created an article,

    Can Reolink Products be Switched off Remotely

    Applies to: All Reolink cameras/NVRs Reolink camera/NVR can’t be switched off remotely, but you can restore/reboot the camera/NVR remotely when you can still connect it. Please refer to the guideli...

  • Hannio created an article,

    Camera Prompts "QR code does not match" Voice or No Voice After Scanning the QR Code on the APP

    Applies to: Reolink Argus series, E1 series and Reolink Lumus If you got "QR code does not match" message during the camera initial setup process, there were 2 cases: Case 1: You heard the "QR code...