Lori
- Total activity 381
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 9
- Subscriptions 227
Activity overview
Latest activity by Lori-
Lori created an article,
No Voice Prompts When Setting up the Camera
Applies to: Battery-Powered Cameras, Reolink E1 Series, Reolink Lumus If you cannot hear voice prompts when setting up the camera, the solutions below may help you. Cause 1: The Battery Has Been ...
-
Lori created an article,
Low Sound on the Phone/Computer When Using Two-Way Audio
Applies to: Battery-Powered Cameras, Reolink E1 Series, Reolink Lumus If the sound coming from phone is too low when you are using two-way audio, the solutions below may help you. Cause 1: Volume o...
-
Lori created an article,
Failed to Input the Email Address When Signing up Cloud Account
There are two kinds of error prompts that you might receive when signing up a cloud account: "Invalid username" and "Your emails do not match. Please try again." Please refer to the below tips to s...
-
Lori created an article,
How to Reset Reolink Lumus
Applies to: Reolink Lumus Step 1. Power the camera. Step 2. Insert the reset needle into the reset hole of your camera. Step 3. Press and hold for several seconds until you hear the prompt “Facto...
-
Lori created an article,
How to Enable/Disable Auto Add via Reolink PoE NVR
Applies to: All Reolink PoE NVRs Step 1. Launch your monitor of your NVR, go to Menu->IP channel page. Step 2. You may choose to enable/disable Auto Add by ticking Auto Add as picture below, then ...
-
Lori created an article,
How to Check Camera Status on IP Channel Page via Reolink WiFi NVR
Applies to: Reolink WiFi NVR Step 1. Launch your Monitor of NVR, right-click your mouse and tap icon Step 2. You will find the camera status in the sidebar of the IP channel page.
-
Lori created an article,
How to Check Camera Status on IP Channel page Via Reolink PoE NVR
Applies to: Reolink PoE NVR Step 1. Launch your Monitor of NVR, go to Menu->IP channel page. Step 2. You will find the camera status in the sidebar of the IP channel page. You may refer to Four Typ...
-
Lori created an article,
How tp Disable/Hide the Channels that Show Video Loss on Reolink NVR
Applies to: All Reolink NVRs Channels that show Video Loss couldn't be hidden or disabled via Reolink NVR for now. If you have a Reolink PoE NVR and you have multiple screens to be viewed at the s...
-
Lori created an article,
Can I Cut the End Cables of Reolink Cameras
Applies to: All Reolink cameras with the pigtail cable No. The end cables of Reolink cameras are not removable. Once broken, the entire machine needs to be replaced. Please note that while installi...
-
Lori created an article,
How to Adjust the NVR Display Order via Reolink Client (New Client)
Applies to: All Reolink NVRs 1. Adjust the NVR display order via Reolink Client Step 1. Launch Reolink Client and log into your NVR Step 2. Tap the Split icon and choose how many cameras you want...