Reolink Go Plus is a 4G camera that supports smart person/vehicle detection, siren, two-way audio, cloud, time-lapse, etc. functions. 

To better learn the working principle and settings of the camera, here are some instructions for your reference.

1. Smart Person/Vehicle Detection

2. Siren

3. Two-way audio

4. Cloud

5. Time-lapse

6. Clip

Smart Person/Vehicle Detection

Smart detection includes Smart Person and Vehicle Detection. It is based on traditional motion detection but with advanced algorithms and technology, which can tell people and vehicles from other objects.
This camera also supports setting object size, which contributes to the reduction of false alerts. 

You can set the above functions via the Reolink App or Reolink Client.

Siren

Cameras with audio alarms or Siren can make a loud prolonged sound as a signal or warning when the camera detects motion alarms.

You can enable this feature via the Reolink APP or Reolink Client.

Two-way audio

Two-way audio enables you to receive and transmit audio through the IP camera. Reolink cameras that support Two-way audio have a built-in speaker and microphone, you could talk through the camera via your Reolink app/client when you are far away from home.

You could enable the two-way audio function via the Reolink APP or Reolink Client. 

  • On Reolink App

    1. Log in to your camera on Reolink App, go to Device Settings > Advanced, and enable Record Audio.

    2. Return to the camera live view interface. Tap the loudspeaker loudspeaker icon to turn on the audio and tap the Talk talk button button to enter the 2-way audio interface.

    3. Tap the microphone microphone button to talk and tap the button again to turn it off. To exit the 2-way audio page, tap the cross exit button icon. 

      For more details, please refer to How to Enable Two-Way Audio via Reolink App 

  • On Reolink Client

    1. Launch Reolink Client and log in to the camera, then go to Device Settings > Device > Sounds page to enable the Record audio switch.camera record audio

    2. Enable the audio icon at the bottom of the Live View page, then left-click on the Live Liew Page and click on the Microphone icon.

      camera talk plus

      And then click to start talking, the two-way audio function is enabled and you can talk now. To turn the microphone off, please tap on the icon again.camera talking

      For more details, please refer to How to Enable Two-way Audio via Reolink Client (New Client) 

Cloud

Reolink Cloud service is based on cloud computing technology. It can perform data storage, editing, and retrieval over the Internet. Please note that the Reolink Cloud service is not compulsory but optional.

At present, the Reolink Cloud is supported by several Reolink camera models in different countries and regions (click Reolink Cloud Availability to learn more).

Time-lapse

Time-lapse photography, also known as time-lapse video, is a shooting technique that compresses time. It shoots a group of photos or videos Later, by connecting photo series or extracting video frames, the process of several minutes, hours, or even several years is compressed into a short period of time and played as a video. In a time-lapse video, the process of slowly changing objects or scenes is compressed into a short period of time, presenting a wonderful scene that is usually undetectable by the naked eye.

To set up a Time-lapse for your camera, you could refer to the instructions below.

Clip

The clip function allows you to view the specific area you want to enlarge and check. You can enable the clip function under the Clip Settings option via Reolink software.

You can set this function on the Reolink app or the Reolink client.

  • On Reolink App

    1. Please open your Reolink APP.
    2. Go to Live View page, then tap on the Clip button to enter the clip menu page.
    3. Move and drag the rectangle to the position you want to see.

      clip app

      For more details, please refer to How to Use Clip via Reolink App

  • On Reolink Client

    1. Please open your Reolink PC client.
    2. Choose the camera, and click the Clip icon on the live view page. 
    3. Move the red box on the live-view page to choose the part which you want to enlarge and check. 

      battery clip

      For more details, please refer to How to Use Clip via Reolink Client (New Client)

Know devices settings information about the Battery-Powered cameras, please refer to Device Settings for Battery-powered Cameras