Follow the instruction below step by step if you want to initially set up your 4G camera via Reolink Client.
Applies to: Reolink Go, Reolink Go PT, Reolink Go Plus, Go Series G330, Reolink Go PT Plus, Go Series G430, Reolink Go Ultra, Go Series G340, Reolink Go PT Ultra, Go Series G440, Reolink Go Ranger PT, Go Series G450, KEEN Ranger PT, Reolink Duo 4G, Reolink Duo 2 LTE, Duo Series G750, Reolink TrackMix LTE, Trackmix Series G770, Reolink TrackMix LTE Plus, TrackMix Series G780, Reolink TrackMix Wired LTE, Trackmix Series G765.
Here is a video for your reference:
Step 1. Choose a proper SIM card, install it into the camera, and power up the camera. Then you may hear the voice prompt “Network connection succeeded”. If not, please refer to the instruction to reset your camera.
If what you have is a TrackMix Wired LTE, you can choose to connect it to your router directly with an Ethernet cable and set it up as a wired camera.
Note: Remember to turn on the power switch on your camera except for Reolink Go, Go Plus and Go Ultra.
Step 2. Launch the Reolink Client, and click the “+” icon. Enter the UID number of your camera and then click Add.
Step 3. Read the power-saving tip for battery-powered cameras and click Confirm.
Step 4. Create a login password and name your camera, then click Next.
Step 5. Select a scene according to the place where your camera will be installed, then click Finish.
Note: Only Reolink Go Plus, Go PT Plus, KEEN Ranger PT and Duo 2 LTE have the scene selection option.
Done! You can get a live view page now.