How to Initially Set up Reolink NVRs via Reolink Client (New Client)

This article is aimed at guiding you through the initial setup of Reolink NVRs via Reolink Client.

Applies to: RLN8-410, RLN16-410, RLN36, RLN12W.

Here is a video for your reference:

Step 1. Please plug the LAN port at the back of your NVR into your router with an Ethernet cable to access the internet.

Step 2. Click the “+” icon, select UID, then fill in the blanks with the UID of NVR. Then click Add.

Step 3. Create the device password, then click Next.

Step 4. Create the device name, then click Finish.

Done! Now you could get a live view of your NVR.