This article is aimed at guiding you through the initial setup of Reolink NVRs via Reolink Client.

Applies to: RLN8-410, RLN16-410, RLN36, RLN12W.

Here is a video for your reference:

Step 1. Please plug the LAN port at the back of your NVR into your router with an Ethernet cable to access the internet.

PoE_NVR_connected_to_Router.jpg

Step 2. Click the “+” icon, select UID, then fill in the blanks with the UID of NVR. Then click Add.

1._Click_Add_button.png2._Enter_UID.png

Step 3. Create the device password, then click Next.

3._Create_NVR_password.png

Step 4. Create the device name, then click Finish.

4._Name_your_NVR.png

Done! Now you could get a live view of your NVR.

5._Initialization_finished.png