This article will guide you on how to change the date and time format, the camera's time zone, set up a DST, and use the DST function.

Applies to: All Reolink cameras and NVRs.

Step 1. Launch Reolink Client and log in to your device, and then go to Settings > System > Date & Time page. Select the Time format and Date format according to your local time. 

Also, you can click on Synchronization under Network Time-Protocol to manually synchronize the time.

date&time page.png

Step 2. Click Settings to configure time zone, DST (daylight saving time, also summer time, not all countries have the DST, so you need to set the DST according to your local time), and choose to use the Auto-NTP or manually set the date&time.

Note: Battery-powered cameras do not have NTP settings.

settings icon.png

time settings page.png