How to Playback/Cut/Download Recordings via Reolink Client (New Client)

This article will take you to learn how to playback, cut, and download recordings. Please make sure you have installed Reolink Client on your PC.

Applies to: Reolink NVRs and cameras with Micro SD card slot.

Note: The actual interface will vary depending on the specific model.

Here we will guide you to playback recorded videos on Reolink Client by the following steps.

For Reolink cameras:

For Reolink NVRs:

Step 1. Launch Reolink Client and login into your cameras/NVRs, then click the Playback button to enter the Playback page. And drag the camera to the playback page. Taking Reolink Video Doorbell WiFi as an example.

1._playback_page.png

For NVR:

On the left side menu, click the icon to show the camera list under NVR.

Hold the left mouse button on the camera that you want to playback and drag it to the playback interface.

Step 2. Choose a date by clicking the calendar. The date(s) with recordings will have a blue spot. You can also click beside the calendar to filter different types of alarm recordings. Left-click the blue bar to playback the recording of a certain time.

2._date_with_recordings.png

For NVR:

1. If you want to playback several cameras at the same time, please double-click the playback interface and drag the camera you want to the grid.

2. If you want to zoom in on the timeline, please scroll the mouse and drag the slider to choose the time.

Step 3. Click the Stream icon and you could choose Fluent or Clear mode to playback.

3._change_playback_stream.png

Step 4. You can also change the playback speed.

4._change_playback_speed.png

Step 5. If you want to cut the recordings, please click . After that, you could only playback and download recordings within the cut duration. Click again to disable the Cut function.