To check the monitoring image of different cameras on Reolink NVR, you may need to switch the screens continuously, or you can refer to the following steps to easily set the cameras on tour.
Applies to: RLN8-410, RLN16-410, RLN36
Step 1. Log in to your NVR on the monitor, then go to the Menu > System > General page to set the Scrolliview Time as you need.
Step 2. Select any split (less than the total number of the cameras connected to the NVR) and click on the Scrollview icon to start/stop the tour of the pages.
Comments
0 comments
Article is closed for comments.