Follow the steps below to set the pre-motion recording via Reolink NVR on the monitor, if you want the camera to start to record before the event happens.

Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36 and RLN12W.

Step 1. Click Settings > Surveillance, enable the Record button, and click Record Settings.

settings.png

record_settings.png

Step 2. Enable Start to record before a motion event is detected.

record_settings_all.png