This article introduces the maintenance system settings on Reolink NVRs.
Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36 and RLN12W.
Here we will guide you to configure the maintenance system settings on Reolink NVRs.
Log in your NVR via the monitor, go to Settings > System > Maintenance.
- Enable auto-reboot: check on this option to set up auto-reboot for your NVR system.
- Auto reboot time: select the date and time of auto-reboot.
- Auto upgrade: automatically upgrade the firmware of your NVR to the latest.
- Check for the latest version: check if there is any newer firmware version for the NVR system.
- Upgrade: upgrade the firmware of your NVR to the latest.
- Upgrade IPC: upgrade the firmware for the cameras connected directly to the NVR.
- Restore: restore the NVR back to default settings.
- System log: check the activities of the NVR system, like startup, login, logout, format disk, etc. Activities via all different platforms (App/Client/Monitor) will be recorded.
- Export diagnostic information: get the diagnostic information of the NVR system.