When viewing your cameras on a monitor/TV plugged into your NVR, you probably need to reorder the sequence of those cameras. Below are the steps to re-arrange the display order for the cameras.

Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36, NVS36 and RLN12W, NVS12W.

Note: Make sure that you have connected a monitor and a mouse to the NVR before the following steps.

Method 1

Drag the camera to the channel you want in multiple live view screens.

drag_0.png

drag_2.png

Method 2

Go to Settings > Channel interface, click the channel you want, and then select camera for that channel. 

ip_channel.png

cha2.PNG

If that channel has distributed for other cameras, please click Replace to arrange the camera for that channel again.

replace.png