You are able to set the NVR to buzz (beep) when any of the cameras detect motion, which is sometimes an efficient way to alert you. This article will guide you on how to enable/disable the buzzer for Reolink PoE NVR.

Applies to: All Reolink NVRs

For NVR with hardware versions H3MB18, N2MB02, N3MB01, N5MB01, N6MB01 and N7MB01

Go to Device Settings of your NVR > Surveillance > Buzzer. Turn on Enable Buzzer for the PoE NVR, select the channel you want and ensure the camera Schedule is enabled, and configure a schedule.

If you want to turn off the whole feature, you can directly turn off Enable Buzzer.

disable_buzzer_new_client.png

For NVR with hardware versions H3MB02, H3MB06, H3MB16 and H3MB17

The Buzzer setting interface is slightly different, select the channel you want and enable Schedule.

disable_buzzer_old_ui.png