Upgrading the firmware of your camera or NVR is not a tough task. Below is a detailed instruction that will guide you to upgrade it on Reolink Client step by step.
Applies to: All Reolink NVRs and cameras (excluding battery-powered cameras).
Note: Before upgrading, please first download Reolink Client on your PC.
Step 1. Download the firmware (choose the correct model and version according to your devices) from Reolink Download Center. Unzip the compressed firmware file and make sure the firmware (.pak file) is on your PC desktop.
Step 2. Launch Reolink Client and log in to your cameras/NVRs, then go to Device Settings > System > Maintenance page.
Step 3. Click Browse to select the correct firmware file (.pak file), and then click Upgrade.
Note: If you don't want to restore your camera or NVR settings to factory status, please uncheck/don't enable the Reset Configuration option.
Article is closed for comments.