Applies to: All Reolink Cameras except the battery-powered cameras, B400, D400, B800, D800.
Step 1. Go to Device Settings -> Surveillance -> Push page.
Step 2. Select the channel as you need.
There are three detection types: "Any Motion", "Person" and "Vehicle". Please choose either of them or combine two options/all of them together according to your needs.
Step 3. You may choose the four options(under the time schedule) to configure the schedule.
The first icon is to Enable. You can click it and choose the squares to set the schedule as you need, then click Save to save the settings. You may also drag the mouse to choose the schedule quickly.
The second icon is to disable the time range you choose. The third icon Enable all is to choose all the time squares. The fourth Disable all is to erase the configurations you have set.
One square means one hour.
Step 4. You may also click Apply to Other Cameras to copy the schedule to other channels quickly, and then click Save button.
Comments
0 comments
Article is closed for comments.