Applies to: Argus PT; Go PT
Step 1. Screw the camera bracket into the wall.
Step 2. Screw the antenna to the camera.
Step 3. Screw the camera to the bracket.
Step 4. Please separate the brackets as shown in the figure below. Pull out the screw that fixes the bracket, unscrew the bracket counterclockwise, and take it out.
Step 5. Install the bracket on the ceiling first, and then install the camera on the bracket.
There are two types of strap installation, hoisting, and wall-mounting.
For the first kind of installation, you need to separate the bracket first. Then take out the hoisting bracket part, and the strap is threaded into the bracket, and then tied to the tree or pillar, as shown in the picture below.
The wall can be directly threaded into the bracket, and then tied to the tree or pillar on.
Done! You've installed the Argus PT/ GO PT successfully.