This article shows you how to find out the system information for NVR and the cameras connected to NVR on a monitor connected.
Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36 and RLN12W.
You may refer to the following steps to check the firmware version for NVR and the cameras connected to the Reolink NVRs (with hardware version N2MB02, N3MB01, N7MB01, H3MB18, N6MB01, and N5MB01).
Part 1. Find out the System Information of the NVR
Step 1. Click on the Settings icon on the NVR monitor screen.
Step 2. Go to the System > Info page. Now you will be able to find the system information of the NVR, including the hardware version (Hw No.) and firmware version (Fw Version) of your NVR.
Part 2. Find out the System Information of Cameras Connected to NVR
Step 1. Go to Settings > Camera page. Choose the channel of the camera and then click More Info in blue.
Step 2. Now you could find out the hardware version (Hw No.) and firmware version (FW Version) of your camera.
Step 1. Go to Settings > Channel.
Step 2. Under Channel Management, move your mouse to the camera that you want to check, click Info and you will find the Camera Details.