Here we'll guide you to configure record settings for Reolink cameras via Reolink NVR (New UI) on the monitor.

Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36, NVS36, RLN12W, NVS12W

1. Click Settings > Surveillance, Enable Record Button, Click Record Settings.

settings.png

record_settings.png

2. Configure Recording Settings

On this page, you can enable set the Overwrite time, Post-Record duration and Pack Duration.

record_settings_all.png

3. Set up Recording Schedule

On the Schedule Page, you may set the recording time schedule of each channel.

record_daily_schedule.png

record_alarm_schedule.png

Notes: 

1. You can set the Overwrite time to decide when the new recordings will cover the old videos automatically. 

2. If you want to extend the record time after the motion events happened, you can choose the Extend recording time after a motion event ends to set the time.

3. The blue grid means that the camera will record to NVR, while the gray one means “don’t record”.