Applies to: All Reolink cameras with SD card or SD card slot (exclude battery-powered cameras)
Step 1. Log in the camera and go to Device Settings -> Surveillance -> Record page:
Step 2. Click on Enable Record to unfold the schedule.
Step 3. Select Motion or None, then tap on the squares to set the schedule as you need and click Save to save the settings. One square means one hour.
1. The blue grid means that the device will record to SD card when motions detected, while the grey one means “don’t record”.
2. The recording schedule of Reolink C series cameras, Reolink E series cameras, Reolink lumus, the camera with a new firmware of IPC_51516 and IPC_51316, and the camera connected to the NVR could be set as the continuous record, while others start to record videos only when motions detected.
You may also configure the record schedule of Reolink cameras via the Reolink App or web browsers. Check details in: